Click for larger image and other views Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

How can we improve our images or Product Specifications?

Niagara Cutter CNCB430 Carbide Ball Nose End Mills, Inch, Weldon Shank, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, For Use With All Materials

Be the first to review this item

Product Specifications
Manufacturer Series Number
CNCB430
Cutting Direction
Right Hand
Compatible Material
All Materials
Finish Types
TiAlN
End Cut Type
Center Cutting
Shank Type
Weldon
Material Type
Carbide
Cut Type
Roughing and Finishing
UNSPSC Code
27112803
Cutting Angle
30  Degrees
Brand Name
Niagara Cutter
System of Measurement
Inch

This item is no longer available

Free Standard Shipping! on orders over $50.00.
(limited-time offer, certain restrictions apply) (Details)

  • Share
Currently showing 1-13 of 13
Cutting Diameter Shank Width Cutting Length Overall Length Number of Flutes Mfr Part # ASIN

The Amazon Standard Item Number (ASIN) uniquely identifies
the item in the AmazonSupply.com (and Amazon) catalog.

Available

If an item is currently out of stock, but has an estimated lead time, you can place an order now and we will ship it as soon as it is available.
You can also order more than we currently have in stock.
Read more about back orders in our help section.

Price  
All All All All All      
Currently showing 1-13 of 13
1/8" 1/8" 0.500" 1.5" 4 85904 B003CYKKT2 1 $19.53 Buy Options
5/32" 3/16" 0.563" 2" 4 85905 B003CYKKTC 1 $20.42 Buy Options
3/16 " 3/16" 0.625" 2" 4 85906 B003CYKKTM 1 $21.27 Buy Options
7/32" 1/4" 0.625" 2.5" 4 85907 B003CYKKTW 1 $23.06 Buy Options
1/4" 1/4" 0.750" 2.5" 4 85908 B003CYKKU6 Temporarily out of stock. Order now and we'll deliver when available. $26.65 Buy Options
9/32" 5/16" 0.750" 2.5" 4 85909 B003CYKKUG 1 $27.07 Buy Options
5/16" 5/16" 0.813" 2.5" 4 85910 B003CYKKUQ 2 $38.61 Buy Options
3/8 " 3/8" 0.875" 2.5" 4 85911 B003CYKKV0 1 $35.44 Buy Options
7/16" 7/16" 0.875" 2.5" 4 85912 B003CYKKVA 1 $44.60 Buy Options
1/2 "   1" 3" 4 85913 B003CYKKVK Temporarily out of stock. Order now and we'll deliver when available. $57.32 Buy Options
9/16" 9/16" 1.250" 3.5" 4 85914 B003CYKKVU 1 $92.36 Buy Options
5/8" 5/8" 1.250" 3.5" 4 85915 B003CYKKW4 Temporarily out of stock. Order now and we'll deliver when available. $112.08 Buy Options
1" 1" 1.500" 4" 4 85917 B003CYKKWO Temporarily out of stock. Order now and we'll deliver when available. $269.49 Buy Options

Key Features

  • NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
  • Four flutes produce a better finish than fewer flutes
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
  • Ball nose end mills (also called ball end) create contoured surfaces

Product Description

The Niagara Cutter CNCB430 TiAlN-coated carbide NC-style ball nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s ball nose creates contoured surfaces, where sharp corners are not required. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

How can we improve our Product Description?

Customer Reviews

There are no customer reviews yet.

Be the first to review this item

Go to the HomePage

Order by Phone
M-F 8am-8pm ET, Sat-Sun 8am-5pm ET 800-220-4242

Become an Associate| Careers| About Us| Contact Us| Conditions of Use| Privacy Notice| Website Feedback | Returns

Follow Us 

© 2014 Amazon.com, Inc. and its affiliates.