Order by Phone 800-220-4242(See availability)
Sign In | My Account | My Lists | Help
How can we improve our images or Product Specifications?
Niagara Cutter MES230 Carbide Square Nose End Mills, Stub Length, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, Non-Center Cutting, 30 Degree Helix, For Use With All Materials
Be the first to review this item
Product Specifications
- Brand Name
- Niagara Cutter
- Compatible Material
- All Materials
- Cut Type
- Roughing and Finishing
- Cutting Angle
- 30 Degrees
- Cutting Direction
- Right Hand
- End Cut Type
- Non-Center Cutting
- Finish Types
- Uncoated (Bright)
- Manufacturer Series Number
- MES230
- Material Type
- Carbide
- Shank Type
- Round
- System of Measurement
- Inch
These items ship for FREE with 2-Day Shipping on orders over $50. (Details)
Want it delivered on Friday, June 21? Order in-stock items in the next 22 hours 7 minutes and choose One-Day Shipping at checkout.
Key Features
- Miniature end mills create the intricate cuts needed for precision industries
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Carbide can run at higher speeds than high-speed or cobalt steel, offering increased wear resistance and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating to retain miniature end mill's tight tolerances
Product Description
The Niagara Cutter MES230 miniature uncoated (bright) carbide square nose end mill with stub length has two flutes and a 30-degree helix to create the intricate cuts and fine finish needed for precision industries, such as electronics and medical-device manufacturing. The two flutes have better chip-carrying capacity than end mills with more flutes. The stub length increases tool strength and makes it less likely to break in the material being machined. It is best used when depth of cut is shallow. The 30-degree helix balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. Combined with stub length, this allows efficient cuts in the difficult-to-machine materials common in precision industries, such as stainless steel and reinforced plastic. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, and the center-cutting design allows the tool to plunge into the workpiece like a drill bit.
The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, it features just the base material to help the miniature mill retain its sharp edges and tight tolerances. The tool has a total indicated runout (TIR) of + or - 0.0002”. This measurement defines the positional accuracy of the end mill’s horizontal movement from the shank to the cutting edge. To increase rigidity and ensure low runout, the tool’s round shank should be held by a precision holder. Cutting diameter tolerance is + or - 0.0005”. All sizes have an overall length of 1-1/2” and a shank diameter of 1/8”.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools for over 50 years. Specializing in end mills, cutting mills, and saws, the company manufactures all of its tools at its two facilities in the USA. This allows the company complete control over production, an essential benefit for customers in a variety of industries, especially aerospace and automotive.
How can we improve our Product Description?
Customer Reviews
There are no customer reviews yet.
Be the first to review this item
