Order by Phone 800-220-4242(See availability)
Sign In | My Account | My Lists | Help
Millipore SLGS0250S Cellulose Mixed Cellulose Esters Millex-GS Filter Unit, Sterile, GS, 29mm Diameter, 0.22 Micron, 75mL/min Flow Rate (Pack of 50)
Be the first to review this item
ASIN B004OYTJ14
Specifications for this item
- Brand Name
- Millipore
- Material Type
- Cellulose
- Number of Items
- 50
- Outside Diameter
- 29 millimeters
- Part Number
- SLGS0250S
This item ships for FREE with 2-Day Shipping on orders over $50. (Details)
Want it delivered on Thursday, June 20? Order in-stock items in the next 34 minutes and choose One-Day Shipping at checkout.
Key Features
- Polyvinyl chloride housing; 25mm inlet to outlet; diameter 29mm (1.14 in.); filtration area 4 cm squared (0.62 in squared); temperature limit 45 degree C (113 degree F)^Pressure limit at 25 degree C 75 psi (5.2 bar) inlet and differential; filtration volume 1-100mL; hold-up volume <= 0.1mL after air purge^Sterilization method ethylene oxide gas^Connections female luer-lok inlet, male luer-slip outlet^Flow rate at 30 psi (2.1 bar), 25 degree C >=75 mL/min
Package Details
Shipping Weight:
0.7 pounds
Package Size:
6.4 x 5.1 x 5 inches
Product Description
The bidirectionally supported Millex-GS device is a sterilizing filter for aqueous solutions dispensed with a syringe. It will remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 microns (�m). The sterile Millex-GS filter unit is non-pyrogenic and non-toxic. This single-use product consists of a 0.22�m membrane filter sealed in a plastic housing. Typical applications include the sterile filtration of critical care solutions (neonatal, burn, TPN without lipids, additives, extemporaneous solutions), tissue culture media, additives, buffers, and water. The Millex-GS filter unit is compatible with most aqueous solutions. Do not resterilize or reuse this filter unit, as Millipore cannot assure the sterility, integrity, and performance beyond a single use. Do not use the Millex-GS unit at temperatures above 45 Degrees celsius (113 degrees fahrenheit). Do not use the same Millex-GS unit to filter solutions in both directions. Do not use the Millex-GS unit to filter emulsions or suspensions. Do not use the Millex-GS unit to filter 5mg or less of active drug materials unless binding studies have been performed. To ensure sterility, Do not use this product if the package is damaged. Do not use this product as an in-line filter for intravenous administration; it was not designed for long-term continuous use. Do not use with syringes smaller than 10mL because pressures in excess of the maximum pressure rating may be reache, potentially causing damage to the filter unit and/or personal injury.
How can we improve our Product Description?
Customer Reviews
There are no customer reviews yet.
Be the first to review this item
