Click for larger image and other views Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

How can we improve our images or Product Specifications?

Harrington SNER Single Speed Electric Chain Hoist, Single Phase, Hook Mount

Be the first to review this item

Product Specifications
Manufacturer Series Number
SNER Single Speed
Lifting Material Type
Nickel
Mounting Type
Hook
Material Type
Aluminum
UNSPSC Code
24101602
Brand Name
Harrington
Motor Phase
Single Phase

This item is no longer available

Free Standard Shipping! on orders over $50.00.
(limited-time offer, certain restrictions apply) (Details)

  • Share
Currently showing 1-4 of 4
Load Capacity Lifting Speed Horsepower Lift Headroom Hook Opening Voltage ASIN

The Amazon Standard Item Number (ASIN) uniquely identifies
the item in the AmazonSupply.com (and Amazon) catalog.

Available

If an item is currently out of stock, but has an estimated lead time, you can place an order now and we will ship it as soon as it is available.
You can also order more than we currently have in stock.
Read more about back orders in our help section.

Price  
All All All All All All All      
Currently showing 1-4 of 4
500 lbs 14 fpm 0.34 20 ft 13.8" 0.9" 115/230V B004SHT5EI yes $1,835.83 Buy Options
500 lbs 14 fpm 0.34 10 ft 13.8" 0.9" 115/230V B004SHT5CU yes $1,844.00 Buy Options
1000 lbs 7 fpm 0.34 20 ft 14" 0.9" 115/230V B004SHT5L6 yes $1,390.51 Buy Options
1000 lbs 7 fpm 0.34 10 ft 14" 0.9" 115/230V B004SHT5JI yes $1,985.81 Buy Options

Key Features

  • Single speed, single phase electric chain hoist and hook mount with compact die-cast aluminum body and low headroom
  • Fan-cooled motor with ASME H4 rating for heavy duty work
  • Hoist body housing is sealed for protection from dirt, moisture, and harsh environmental conditions
  • Load sheave with deep-groove pockets to support the load chain, and help reduce vibration and chain wear
  • Pull-rotor electric brake with self-adjusting brake drum and no brake coil for less maintenance

Product Description

The Harrington SNER single speed electric chain hoist with hook mount operates on single phase power and has a compact die-cast aluminum body with low headroom; and a fan-cooled motor with a 60-minute short term duty rating and an American Society for Mechanical Engineers (ASME) H4 rating for heavy duty work. The body housing on this hoist is sealed for protection from dirt, moisture, and harsh environmental conditions. This hoist has a load sheave with deep-groove pockets to support the load chain, and help reduce vibration and chain wear. The pull-rotor electric brake has a self-adjusting brake drum and no brake coil for less maintenance. This hoist has a chain guide made of heavy cast iron for durability, which can be removed without disassembly; forged carbon steel hooks designed to resist fracture under stress; a grade 80 nickel-plated, heat-treated load chain for resistance to wear; and a load hook that swivels 360 degrees. A friction clutch helps prevent over winding. This hoist has heat treated helical and spur gears that are precision machined and lubricated by oil bath for smoother control and less heat. Control voltage is 110V. The Harrington SNER single speed electric chain hoist is typically used to lift and move loads for industrial or commercial applications, but also may be used in other industries with similar applications. This hoist is built to comply with American National Standards Institute /American Society for Mechanical Engineers (ANSI/ASME) B30.16 and HST-1M standards; and the American National Standards Institute/National Fire Protection Association (ANSI/NFPA) 70, National Electrical Code. When used according to manufacturer’s recommendations, this product is covered by a one-year warranty from date of shipment against defects in workmanship or materials.

Hoists are devices that use relatively small amounts of force to lift, lower, and move heavy loads. Power hoists transfer a small, motor-generated force across a series of gears that multiply the force into one large enough to lift the designated load. Their lifting mechanisms consist of a motor; drive shaft and gear set; and a chain, rope, or wire, with a hook attached to it for lifting loads. Hoists are commonly suspended from structures by hook or trolley mounts, and are typically used in a variety of industries such as transportation, construction, manufacturing, mining, plumbing, foundry, and material handling.

Load capacity is the maximum rated load a hoist can handle. While manufacturers may indicate they have tested a hoist beyond its limits, operators should never attempt to lift a load heavier than the maximum rated load. Lifting speed describes, in feet per minute (fpm), how quickly the hoist can lift the maximum rated load. Lift is the maximum vertical distance the load hook can move a load. Headroom is the distance from the bottom of the load hook to the top of the hoist. This is the minimum amount of vertical space needed for the hoist to hang freely and operate correctly. Duty ratings describe the maximum amount of time a hoist can run and the number of times it can start over a given time period under various conditions such as intermittent use, or short and lengthy periods of operation.

Harrington Hoists manufactures hoists and cranes. The company, founded in 1854 and headquartered in Manheim, PA, meets International Organization for Standardization (ISO) standard 9001.

How can we improve our Product Description?

Customer Reviews

There are no customer reviews yet.

Be the first to review this item

Go to the HomePage

Order by Phone
M-F 8am-8pm ET, Sat-Sun 8am-5pm ET 800-220-4242

My Account| Returns| Help

Website Feedback| Contact Us| Sell on AmazonSupply| Become an Affiliate

Privacy Notice| Conditions of Use

Follow Us 

© 2014 Amazon.com, Inc. and its affiliates.