Hanna Instruments Portable Low Range Fluoride Photometer Kit

The Hanna Instruments HI 96729C low-range fluoride colorimeter kit is a handheld device using an advanced optical system to measure the amount of fluoride in a water sample after a reagent is added.

To take a reading, simply fill the cuvette with 10mL of water, add 2mL of the fluoride reagent, and press “read”. The meter uses a tungsten lamp light source, and a silicon photocell with a narrow band interference filter to detect the amount of fluoride present.

The factory-calibrated meter features Hanna Instrument’s Cal-Check validation function, which ensures the meter is properly calibrated, and includes instructions on how to easily recalibrate, if necessary. The meter is water- and dust-resistant, and includes a special locking feature to ensure the cuvette is properly in place for each reading.

The HI 96729C uses an adaption of EPA method 340.1 and Standard Methods for the Examination of Water and Wastewater, 20th edition, SPADNS method. The meter measures fluoride content in the 0.00 to 2.00 mg/L (ppm) range (+ or - 0.03 mg/L + or - 3% of reading at 25 degrees C) with a resolution of 0.01 mg/L. It operates on one 9V battery, and automatically shuts itself off after ten minutes.

Fluoride colorimeters are used for measuring the amount of fluoride present in drinking water and other water sources. Fluoride exists in groundwater from the natural weathering of rocks, from agricultural run-off, and is also sometimes added to drinking water to prevent tooth decay. Fluoride meters are used to ensure appropriate levels of fluoride are present in drinking water, agricultural run-off, and in food and beverage manufacturing.

Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built-in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To ensure the quality of their products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing.

What’s in the Box?

• Two sample cuvets with caps
• 2000 uL automatic pipette with cap
• Pipette tip, 9V battery
• Tissue for wiping cuvets
• Instruction manual
• Carrying case

How can we improve our Product Description?