This item ships for FREE with 2-Day Shipping on orders over $50. (Details)
Want it delivered on Thursday, June 20? Order in-stock items in the next 15 hours 23 minutes and choose One-Day Shipping at checkout.
Package Size: 10.2 x 8 x 2.5 inches
This O-ring set is made of black Buna-nitrile (Buna-N), has a durometer of 70A, and includes 382 pieces covering 30 dash sizes. The rings have a round cross-section and can be used across a wide temperature range (-30 degrees F/-34 degrees C to 250 degrees F/121 degrees C). The rings come in a plastic storage case designed for organization and portability. Designed for use in a variety of sealing applications, from valves to engines, this Buna-nitrile O-ring set meets standards defined by Aerospace Standard AS568A for quality assurance.
The set includes the following O-rings: 20 pieces each for dash sizes 006, 007, 008, 009, 010, 011, 012; 13 pieces each for dash sizes 110, 111, 112, 113, 114, 115, 116; 10 pieces each for dash sizes 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222; and seven pieces each for dash sizes 325, 326, and 327.
Buna-nitrile can have high tensile strength, as well as abrasion, tear, and compression set resistance. It is compatible for use with petroleum, hexafluoroacetone (HFA), hexafluoro-2-butyne (HFB) and hydrofluorocarbon (HFC) fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering, and should not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light.
The durometer hardness of this Buna O-ring is 70A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics.
O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568A dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.
What's in the box?
How can we improve our Product Description?
There are no customer reviews yet.Be the first to review this item